ADAMANT diamantslijpschijf, hoogte van het beleg ca. 1 mm, korrel P80

ADAMANT diamantslijpschijf, hoogte van het beleg ca. 1 mm, korrel P80

Artikelnummer: 140-0080
Categorie: Diamantslijpschijf ADAMANT-IDAMANT made by Schmitz
Producent: Schmitz-Metallographie GmbH

Diameter

vanaf

114,00 €

excl. 19% Omzetbelasting , Plus

vanaf	Stukprijs / stuk (1,00 stuk)
2	114,00 €*

Direct beschikbaar

Voor dit product zijn er verschillende varianten. Selecteer de gewenste variant a.u.b.

Beschrijving

NEW: In-House Development

ADAMANT© is a resin-bonded high-performance diamond abrasive wheel. It is available in P80, P220, P600 and P1200 grit and 250 and 300 mm diameter.

Highest coat thickness available in the market
Very high abrasion rate
Extremely long lifetime
Full water contact of your samples after grinding-in
Self-sharpening
Wear-optimized coating geometry with wear indication
Unbeatable pric
Patent pending

Composition:
Punched-through cavities in a porous polyurethane coating are filled with a diamond abrasive mixture. After a certain grinding-in time, your samples even have full contact with the PU layer which ensures optimum sample cooling. The PU layer is worn evenly together with the abrasive bodies. When metal starts to shine through, the service time has run out.
The carrier plate is made of brushed stainless 1.4016 with three practical handles. It is simply attached to the magnetic rotary disc of your machine.
Conventional wheels have a uniform abrasive coat distribution. However, coatings always wear out faster near the centre than near the outer diameter. Therefore, our coating geometry was optimized to ensure uniform wear.

Purchase without risk:
Your first order will be brought to account only after four weeks – thus, you’ll have ample time to test the wheel. If you’re not satisfied, you can simply send the wheel back. It will not be invoiced in this case.